Septic systems are the underground wastewater treatment structures commonly used in rural areas, where people don’t have centralized sewer systems. It uses a combination of nature and proven technology to treat the wastewater from household plumbing produced in the kitchen, laundry, and bathrooms.
A typical septic system consists of a septic tank and a drained field, also known as an absorption field. The septic tank gets the organic matter and separates the floatable issues such as the oil, fat, and grease from the wastewater. The soil-based system releases the liquid from the septic tank with the pipes buried in the leach field to discharge the effluent into the soil slowly.
But, if I talk about the alternative system, they use pumps or gravity to help the septic tank effluent trickle through organic matter to remove the pollutants. Similarly, some alternative systems are designed to evaporate the wastewater before it is released into the soil.
The Working of a Conventional Septic System
The following steps are the steps that show the working on the septic tank.
- All the water from your home comes out with the help of one pipe and falls into the septic tank.
- The septic tank is buried and made up of concrete fiberglass or polyethylene, which allows the wastewater long enough to allow the solids to settle down to the bottom whole; the oil, fat, and grease come to the top of the tank. The compartment and the T-shaped prevent this waste material from leaving the tank and make it travel to the drainfield area.
- The liquid effluent then exits the tank into the drain field.
- The drain field evacuation is made in saturated soil, and the pretreated water is released through the pep on the surface that permits the water to filter through the soil. This soil accepts the wastewater, and when it reaches groundwater.
- If the drain field is overloaded with a large amount of water, it can flood, which can cause the sewage to flow to the ground surface.
- Last, the wastewater percolates into the soil and removes the harmful nutrients and viruses.
Thus, this is how the septic tank works, and all of its parts play an essential role in completing the work.
How to Find Septic Tank?
Once you know that you have a septic tank, you can find it by;
- Checking your yard for lids
- Looking at the map or as-built drawing of your home
- Contacting a septic tank provides their assistance
To conclude the discussion above, we can say that septic system processes should not have to be complicated. You must check your septic tank working every two to three years. A professional can thoroughly inspect and identify your tank’s problems. If you want the assistance of experts, you can trust Jamies Removal Assist, which has a team of trained professionals that give you a standard inspection of a septic home at your home. Moreover, if you want to buy a house, you can hire us to assess that property, and we will give you complete information about that system and save you from wasting your money.